Mercury Elite 2000VA Pro Offline Ups
Mercury Elite 2000VA Pro Offline Ups from the leading Mercury UPS dealer in Nairobi Kenya, buy online Mercury Elite 2000VA Pro Offline Ups and have it delivered at your doorstep.
Mercury Elite 2000VA Pro Line Interactive UPS provides a vigorous backup solution for your home and office power backup needs. The Mercury Elite 2000VA Pro UPS (2KVA) gives solid protection for your equipment.
Mercury Elite 2000VA Pro Offline Ups comes with a built-in AVR function to protect against dangerous NEPA fluctuations.
Mercury Elite 2000VA Pro Offline Ups specifications
- Brand: Mercury
- Model: Elite 2000VA Pro
- Type: Offline (Standby) UPS
- Capacity: 2000VA / 1200W
Electrical Input
- Voltage Range: 140V – 300V AC
- Frequency Range: 50Hz / 60Hz ±5Hz (Auto Sensing)
- Input Voltage: 220V AC
Electrical Output
- Output Voltage: 220V ±10% AC
- Frequency: 50Hz or 60Hz ±1Hz
- Output Power Factor: 0.6
- Waveform: Modified Sine Wave
- Transfer Time: Typically 4-6 ms (when switching to battery)
Battery
- Battery Type: Sealed Lead-Acid Maintenance-Free
- Number of Batteries: Typically 2 x 12V 9AH (varies by model)
- DC Voltage: 24V DC
- Typical Recharge Time: 4-6 hours to 90% capacity
- Battery Backup Time: Approximately 10-20 minutes (depending on load)
Protection
- Overload Protection: Yes
- Short Circuit Protection: Yes
- Over Temperature Protection: Yes
- Battery Overcharge Protection: Yes
Indicators and Alarms
- LED Indicators: Power On, Battery Mode, Overload, Fault
- Audible Alarm: Battery Mode, Low Battery, Overload, Fault
Connectivity
- Communication Ports: USB (for monitoring and control)
- Software: Power management software (optional for monitoring)
Physical Specifications
- Dimensions: (W x H x D) 145 x 220 x 360 mm (5.71 x 8.66 x 14.17 inches)
- Weight: Approximately 6.5 kg (14.33 lbs)
Environmental Specifications
- Operating Temperature: 0°C to 40°C (32°F to 104°F)
- Operating Humidity: 0-90% RH (Non-Condensing)
- Storage Temperature: -20°C to 50°C (-4°F to 122°F)
- Noise Level: Less than 40 dB at 1 meter
Features
- Offline (Standby) Technology: Provides backup power and basic surge protection
- Cold Start Function: Yes, allows the UPS to start on battery power alone
- Auto Restart: Yes, automatically restarts when AC power is restored
- Energy-Saving Features: Yes, designed for efficiency
- Surge Protection: Yes, for connected equipment
Standards and Certifications
- Certifications: CE, ISO9001, ISO14001
- Compliance: IEC/EN62040-1
| Rating input voltage | 2000 VA / 1200 W |
| Rating input frequency | 60/50Hz (auto sensing) |
| Input phase | Single phase |
| Input socket | With Fuse |
| Cold Start (0 to 100% load) | Press the ON/OFF Switch |
| Input Range (220V) | 140-300 |
| Rating output(VA) | 2000 |
| Rating output (W) | 1200 |
| Power factor | 0.6 |
| Rating output voltage (V) | 220 |
| Waveform | Battery mode (simulated sine wave), AC mode(sine wave) |
| AC Voltage Regulation | ±10% (Battery mode) |
| Rear output socket | 4 x Universal – Battery backup |
| Waveform | Simulated Sine Wave (Battery mode) |
| Line Mode | Synchronize with the utility |
| Rating frequency | 60Hz or 50 Hz ± 1 Hz |
| Battery Mode | Yellow flashing |
| Short circuit protection Line Mode | Fuse & Firmware protection |
| Short circuit protection Battery Mode | Firmware Protection |
| Overload protection Line Mode | 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. |
| Overload protection Battery Mode | 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately |
| Indicators AC mode | Green Lighting |
| Indicators Battery Mode | Yellow Flashing |
| Indicators Fault | Red Lighting |
| Alarm Battery Mode | Sounding every 10 Seconds |
| Alarm Low Battery | Sounding every Second |
| Alarm Overload | Sounding every 0.5 second |
| Alarm Fault | Continuously sounding |
| Full Protection | Overload, discharge, and Overcharge protection |
| Transfer Time | Typical 2-6ms, 10ms max. |
| Transfer Time | Typical 2-6ms, 10ms max. |
| Communication Interface | Optional RS232/RJ11 |
| Battery and runtime Rating | 2 X 12V/9AH |
| Recharge time – Typical | 6-8 hours recover to 90% capacity |
| Charge current | About 1A at normal mode. |
| Dimension, W X H X D (cm) | 22.5 X 12.5 X 39 |
| Net Weight (kgs) | 12.7KGS |
| Humidity | 0-90 % RH @ 0- 40°C (non-condensing) |
| Noise Level | Less than 45dB |
| Compatible with OS | Supports Windows® 2000/2003/XP/Vista/2008/7 |
| Communication interface | Elite 2000pro (N/A), Elite 2000ipro (USB/RJ11) |
