Mercury Elite 650VA Pro Line Interactive UPS
Mercury Elite 650VA Pro Line Interactive UPS from the leading mercury UPS dealer in Nairobi Kenya, buy Mercury Elite 650VA Pro Line Interactive UPS and have it delivered at your doorstep.
Mercury Elite 650VA Pro Line Interactive UPS topology includes technology that enables the UPS to interact with incoming AC voltage and correct minor voltage fluctuations without switching to battery.
Mercury Elite 650VA Pro Line Interactive UPS extends the life of the battery and is essential in areas where frequent power fluctuations are common.
Mercury Elite 650VA Pro Line Interactive UPS Interactive UPS ideal for Personal Computers and Electrical Equipment. Protects from damage, downtime, and data loss.
Mercury Elite 650VA Pro Line Interactive UPS Specifications
- Capacity: 650VA, which corresponds to approximately 390 watts.
- Line Interactive Technology: The UPS employs line interactive technology, which allows it to regulate voltage fluctuations and provide battery backup during power outages.
- Input Voltage Range: The UPS typically has a wide input voltage range, allowing it to handle various input voltage levels and protect connected devices from surges, sags, and spikes.
- Battery Backup: The UPS provides battery backup to keep your devices running during power interruptions, allowing you to save your work and safely shut down equipment.
- Surge Protection: It includes built-in surge protection to safeguard your devices against voltage surges and transient spikes.
- Automatic Voltage Regulation (AVR): The UPS has AVR functionality to stabilize the output voltage and ensure it remains within a safe range, even during voltage fluctuations.
- Output Sockets: The UPS is equipped with multiple output sockets to connect your devices and provide battery backup and surge protection.
- LED Indicators: LED indicators on the front panel display the UPS’s status, including battery level, load level, and fault notifications.
- Audible Alarms: The UPS emits audible alarms to alert you of power events, such as low battery, overload, or fault conditions.
- Communication Ports: Some models may have USB or serial ports for connecting the UPS to a computer or network for monitoring, management, and automated shutdown capabilities.
- Software Compatibility: The UPS may be compatible with power management software that allows you to monitor and control the UPS remotely from a computer.
| Input voltage | 220VAC |
| Input frequency | 50Hz |
| Input phase | Single-phase |
| Input socket | With Fuse |
| Cold Start (0 to 100% load) | Press the ON/OFF switch |
| Input range (220V) | 140V-300V |
| Rating output (VA). | 650VA |
| Rating output (W). | 390W |
| Rating output (W). | Battery mode(simulated sine wave), AC mode (sine wave) |
| Power factor | 0.6 |
| Rating voltage | 220V |
| Output range | 220Vac-7%+15% ( in battery mode ) |
| Rear Output Socket | 2xUniversal – Battery backup |
| Transfer time | TYPICAL 4-8 ms |
| Communication Interface | NIL |
| Rating frequency | 50Hz |
| Output Frequency Line-mode | Synchronize with the Utility |
| Battery mode | 50 Hz±1Hz |
| Output Frequency Line Mode | Synchronize with the utility |
| Short Circuit Protection Line Mode | FUSE & firmware protection |
| Battery Mode | Software protection controlled by firmware |
| Overload Protection Line Mode | 110%+-5% (Go to fault mode after 5 minutes), 120%+-5% (Go to fault mode immediately) |
| Battery Mode | 110%+-5% (Shutdown after 5 minutes) 120%+-5% (Shut down immediately) |
| Rating frequency | 12V/8.2AH x 1 |
| Backup Tim – Typical | 10mins to 18mins (depending on load) |
| Charge Current | About 1A at normal mode |
| Over Charge Protection | >14.5V +/- 0.2V stop charging <13.5V +/- 0.5V Recharge |
| Weight | 5.6kg +/- 0.3Kg |
| Dimension | 390x 145 x 220 (mm) |
| Master Carton | 45.5 x 40 x 23.5 (cm) (4pcs) |
