

Mercury Elite 3000VA Line Interactive UPS
KSh45,500.00 Original price was: KSh45,500.00.KSh34,000.00Current price is: KSh34,000.00. + VAT
Mercury Elite 3000VA Line Interactive UPS
- Brand: Mercury
- Input voltage: 220VAC
- Input frequency: 50Hz
- Input phase: Single phase
- Input socket: With Fuse
- Cold Start (0 to 100% load): Press the ON/OFF switch
- Input range (220V): 140-300
- Rating output (VA): 1200VA
- Rating output (W): 720W
- Waveform: Battery mode(simulated sine wave),AC mode(sine wave)
- Power factor: 0.6
- Rating voltage: 220V
- Output range: 220Vac-7% to +15% in battery mode
- Rear Output Socket: 4 x Universal – Battery backup
- Transfer time: TYPICAL4-8ms
- Communication Interface: optional RS232/RJ11
- Rating frequency: 50Hz
Mercury Elite 3000VA Line Interactive UPS
Mercury Elite 3000VA Line Interactive UPS from the leading Mercury UPS dealer in Nairobi Kenya, buy online Mercury Elite 3000VA Line Interactive UPS and have it delivered to your destination of choice.
Mercury 3KVA UPS is equipped with boost and buck AVR, meaning you don’t need to invest in a separate AVR for it. With its clear LCD display, you can easily monitor the status of the UPS. Here, check the features of the 3KVA Mercury ELITE 3000VA UPS:
3KVA mercury UPS is designed for market leaders who do not want to waste any precious time in case of power blackout. Mercury UPS not only offers backup for devices but also connects the company most valued assets to clean power source hence preventing any damage that might occur due to power surge.
Mercury 3KVA UPS specifications
- Brand: Mercury
- Model: Elite 3000U
- Type: Offline (Standby) UPS
- Capacity: 3000VA / 1800W,
Electrical Input
- Voltage Range: 140V – 300V AC
- Frequency Range: 50Hz / 60Hz ±5Hz (Auto Sensing)
- Input Voltage: 220V AC
Electrical Output
- Output Voltage: 220V ±10% AC
- Frequency: 50Hz or 60Hz ±1Hz
- Output Power Factor: 0.6
- Waveform: Modified Sine Wave
- Transfer Time: Typically 4-6 ms (when switching to battery)
Battery
- Battery Type: Sealed Lead-Acid Maintenance-Free
- Number of Batteries: Typically 4 x 12V 9AH (varies by model)
- DC Voltage: 48V DC
- Typical Recharge Time: 4-6 hours to 90% capacity
- Battery Backup Time: Approximately 15-30 minutes (depending on load)
Protection
- Overload Protection: Yes
- Short Circuit Protection: Yes
- Over Temperature Protection: Yes
- Battery Overcharge Protection: Yes
Indicators and Alarms
- LED Indicators: Power On, Battery Mode, Overload, Fault
- Audible Alarm: Battery Mode, Low Battery, Overload, Fault
Connectivity
- Communication Ports: USB (for monitoring and control)
- Software: Power management software (optional for monitoring)
Physical Specifications
- Dimensions: (W x H x D) 190 x 260 x 450 mm (7.48 x 10.24 x 17.72 inches)
- Weight: Approximately 10 kg (22.05 lbs)
Environmental Specifications
- Operating Temperature: 0°C to 40°C (32°F to 104°F)
- Operating Humidity: 0-90% RH (Non-Condensing)
- Storage Temperature: -20°C to 50°C (-4°F to 122°F)
- Noise Level: Less than 45 dB at 1 meter
Features
- Offline (Standby) Technology: Provides backup power and basic surge protection
- Cold Start Function: Yes, allows the UPS to start on battery power alone
- Auto Restart: Yes, automatically restarts when AC power is restored
- Energy-Saving Features: Yes, designed for efficiency
- Surge Protection: Yes, for connected equipment
CAPACITY | : |
Rating | 3000VA |
INPUT | : |
Voltage | 220VAC / 230VAC / 240VAC |
Voltage Range | 140 – 300VAC |
OUTPUT | : |
Voltage Regulation (Batt. Mode) | +/-10% |
Frequency | 50Hz or 60Hz |
Frequency Regulation(Batt. Mode) | +/-1Hz |
Output Waveform | Modified Sine Wave |
BATTERY | : |
Battery Type | 12V/9.0AH x 4 |
Recharge Time | 6-8 hrs to 90% after complete discharge |
TRANSFER TIME | : |
Typical | 10ms |
INDICATOR | : |
AC Mode | The left green LED lighting & the 1st to 4th green LEDs gradually lighting indicating load level |
Battery Mode | The left green LED flashing & the 1st to 4th green LEDs gradually lighting indicating battery capacity |
Fault Mode | Red LED Lighting |
: | |
Backup Mode | Sounding every 10 seconds |
Low Battery | Sounding every 1 seconds |
Overload | Sounding every 0.5 seconds |
Fault | Continuously sounding |
PROTECTION | : |
Full Protection | Discharge, Overcharge and Overload Protection |
PHYSICAL | : |
Dimension (mm) | 436(L) x 145(W) x 211.7(H) |
ENVIRONMENT | : |
Operating Environment | 0°C – 40°C |
Noice Level | Less than 40dB |
Related products
APC 1400VA Back-UPS , BX1400U-MS
APC 2200VA/2.2KVA LCD 230V Smart-UPS , SMT2200I
- Model: APC SMT2200I
- Type: Line-Interactive UPS
- Power Capacity: 2200 VA / 1980 Watts
- Input Voltage: 230V (nominal)
- Input Voltage Range: 160V - 286V (without battery usage)
- Input Frequency: 50/60 Hz (auto-sensing)
- Output Voltage: 230V (nominal)
- Output Frequency: 50/60 Hz ± 1 Hz (auto-sensing)
- Waveform Type: Stepped Approximation to Sine Wave
APC 750VA Smart-UPS LCD 230V, SMT750I
- Model Name: APC Smart-UPS 750VA LCD 230V SMT750I
- Form Factor: Tower
- Topology: Line Interactive
- User Replaceable Battery: Yes
Electrical Input:
- Input Voltage: 230V
- Input Frequency: 50/60 Hz ± 3 Hz (auto-sensing)
- Input Connection Type: IEC-320 C14
- Input Voltage Range: 160V - 286V
- Input Surge Protection: 459 joules
APC Smart-UPS 5000VA 230V Rackmount/Tower
- Model: APC SRTG5KXLI
- Type: On-Line UPS
- Power Capacity: 5000 VA / 5000 Watts
- Input Voltage: 230V (nominal)
- Input Voltage Range: 160V - 286V (without battery usage)
- Input Frequency: 50/60 Hz (auto-sensing)
- Output Voltage: 230V (nominal)
- Output Frequency: 50/60 Hz ± 0.1 Hz (synchronized with input)
- Waveform Type: Pure Sine Wave
Mecer 1KVA Line Interactive UPS (ME-1000-VU)
- Microprocessor control guarantees high reliability
- Boost and buck AVR for voltage stabilization
- Auto restart while AC is recovering
- Simulated sine wave
- Off-mode charging
- Cold start function
- USB communication port and RJ-11/RJ-45 protection
- Overload, discharge, and overcharge protection
- Supports Windows Vista/2008, Windows 7, Windows 8 & 10, Linux, Unix, and MAC