Mercury Elite PRO 1000VA 1kVA Offline UPS
Mercury Elite PRO 1000VA 1kVA Offline UPS can be trusted for performance, reliability and durability, the Mercury UPS brand is one of the top choices. The Mercury Elite 1000 Pro Line Interactive UPSis suitable for office and domestic IT equipment and electronics.
Mercury Elite PRO 1000VA UPS provides a relatively robust capacity for power backup to meet office as well as domestic power backup demands. With the Mercury Elite 1000 you not only get power backup for your equipment but also enjoy solid protection for those appliances.
Mercury Elite PRO 1000VA UPS built-in AVR function of the Elite 2000 Pro means dangerous power fluctuations won’t easily make mincemeat of your equipment.
Mercury UPS is designed with advanced technology to deliver effocient performance and durability. Here’s part of the benefits you enjoy in using a Mercury Elite Pro UPS:
Mercury Elite PRO 1000VA UPS Specification
- Brand: Mercury
- Model: Elite Pro 1000VA
- Type: Offline (Standby) UPS
- Capacity: 1000VA / 600W
Electrical Input
- Voltage Range: 140V – 300V AC
- Frequency Range: 50Hz / 60Hz ±5Hz (Auto Sensing)
- Input Voltage: 220V AC
Electrical Output
- Output Voltage: 220V ±10% AC
- Frequency: 50Hz or 60Hz ±1Hz
- Output Power Factor: 0.6
- Waveform: Modified Sine Wave
- Transfer Time: Typically 4-6 ms (when switching to battery)
Battery
- Battery Type: Sealed Lead-Acid Maintenance-Free
- Number of Batteries: Typically 1 x 12V 7AH
- DC Voltage: 12V DC
- Typical Recharge Time: 4-6 hours to 90% capacity
- Battery Backup Time: Approximately 8-15 minutes (depending on load)
Protection
- Overload Protection: Yes
- Short Circuit Protection: Yes
- Over Temperature Protection: Yes
- Battery Overcharge Protection: Yes
Indicators and Alarms
- LED Indicators: Power On, Battery Mode, Overload, Fault
- Audible Alarm: Battery Mode, Low Battery, Overload, Fault
Connectivity
- Communication Ports: USB (for monitoring and control)
- Software: Power management software (optional for monitoring)
Physical Specifications
- Dimensions: (W x H x D) 140 x 200 x 325 mm (5.51 x 7.87 x 12.80 inches)
- Weight: Approximately 4.5 kg (9.92 lbs)
Environmental Specifications
- Operating Temperature: 0°C to 40°C (32°F to 104°F)
- Operating Humidity: 0-90% RH (Non-Condensing)
- Storage Temperature: -20°C to 50°C (-4°F to 122°F)
- Noise Level: Less than 40 dB at 1 meter
Features
- Offline (Standby) Technology: Provides basic backup power and surge protection
- Cold Start Function: Yes, allows the UPS to start on battery power alone
- Auto Restart: Yes, automatically restarts when AC power is restored
- Energy-Saving Features: Yes, designed for energy efficiency
- Surge Protection: Yes, for connected equipment,
Standards and Certifications
- Certifications: CE, ISO9001, ISO14001
- Compliance: IEC/EN62040-1
| Rating input voltage | 2000 VA / 1200 W |
| Rating input frequency | 60/50Hz (auto sensing) |
| Input phase | Single phase |
| Input socket | With Fuse |
| Cold Start (0 to 100% load) | Press the ON/OFF Switch |
| Input Range (220V) | 140-300 |
| Rating output(VA) | 2000 |
| Rating output (W) | 1200 |
| Power factor | 0.6 |
| Rating output voltage (V) | 220 |
| Waveform | Battery mode (simulated sine wave), AC mode(sine wave) |
| AC Voltage Regulation | ±10% (Battery mode) |
| Rear output socket | 4 x Universal – Battery backup |
| Waveform | Simulated Sine Wave (Battery mode) |
| Line Mode | Synchronize with the utility |
| Rating frequency | 60Hz or 50 Hz ± 1 Hz |
| Battery Mode | Yellow flashing |
| Short circuit protection Line Mode | Fuse & Firmware protection |
| Short circuit protection Battery Mode | Firmware Protection |
| Overload protection Line Mode | 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. |
| Overload protection Battery Mode | 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately |
| Indicators AC mode | Green Lighting |
| Indicators Battery Mode | Yellow Flashing |
| Indicators Fault | Red Lighting |
| Alarm Battery Mode | Sounding every 10 Seconds |
| Alarm Low Battery | Sounding every Second |
| Alarm Overload | Sounding every 0.5 second |
| Alarm Fault | Continuously sounding |
| Full Protection | Overload, discharge, and Overcharge protection |
| Transfer Time | Typical 2-6ms, 10ms max. |
| Transfer Time | Typical 2-6ms, 10ms max. |
| Communication Interface | Optional RS232/RJ11 |
| Battery and runtime Rating | 2 X 12V/9AH |
| Recharge time – Typical | 6-8 hours recover to 90% capacity |
| Charge current | About 1A at normal mode. |
| Dimension, D X W X H (mm) | 390 x 125 x 225 |
Reviews
There are no reviews yet.