Mercury Elite 2000U Smart Offline UPS
- Brand: Mercury
- Model: Elite 2000U
- Type: Offline (Standby) UPS
- Capacity: 2000VA / 1200W,
Electrical Input
- Voltage Range: 140V – 300V AC
- Frequency Range: 50Hz / 60Hz ±5Hz (Auto Sensing)
- Input Voltage: 220V AC
Electrical Output
- Output Voltage: 220V ±10% AC
- Frequency: 50Hz / 60Hz ±1Hz
- Output Power Factor: 0.6
- Waveform: Modified Sine Wave
- Transfer Time: Typically 4-6 ms (when switching to battery)
Battery
- Battery Type: Sealed Lead-Acid Maintenance-Free
- Number of Batteries: Typically 2 x 12V 9AH (varies by model)
- DC Voltage: 24V DC
- Typical Recharge Time: 4-6 hours to 90% capacity
- Battery Backup Time: Approximately 10-20 minutes (depending on load)
Protection
- Overload Protection: Yes
- Short Circuit Protection: Yes
- Over Temperature Protection: Yes
- Battery Overcharge Protection: Yes
Indicators and Alarms
- LED Indicators: Power On, Battery Mode, Overload, Fault
- Audible Alarm: Battery Mode, Low Battery, Overload, Fault
Connectivity
- Communication Ports: USB (for monitoring and control)
- Software: Power management software for monitoring and management (may be optional)
Physical Specifications
- Dimensions: (W x H x D) 145 x 220 x 360 mm (5.71 x 8.66 x 14.17 inches)
- Weight: Approximately 6.5 kg (14.33 lbs)
Environmental Specifications
- Operating Temperature: 0°C to 40°C (32°F to 104°F)
- Operating Humidity: 0-90% RH (Non-Condensing)
- Storage Temperature: -20°C to 50°C (-4°F to 122°F)
- Noise Level: Less than 40 dB at 1 meter
Features
- Offline (Standby) Technology: Provides backup power during outages and basic surge protection
- Cold Start Function: Yes, allows the UPS to start on battery power alone
- Auto Restart: Yes, automatically restarts when AC power is restored
- Energy-Saving Features: Yes, designed to be energy-efficient
- Surge Protection: Yes, for connected equipment
Specifications
| Input | |
| Capacity | 2000VA/1200W |
| Voltage Range (220V) | 140~300VAC |
| Frequency | 50/60Hz (Auto-sensing) |
| Phase | Single-phase |
| Socket | With Fuse |
| Cold Start | Press the ON/OFF switch (0%~100% load) |
| Output | |
| Rating Capacity | 2000VA |
| Rating Power | 1200W |
| Waveform | Waveform Battery mode (Simulated Sinewave) AC mode (Sinewave) |
| Power Factor | 0.6 |
| Rating Voltage | 220VAC |
| AC Voltage Regulation | ±10% (Battery mode) |
| Rear Output Socket | 4 x Universal (Battery backup) |
| Output Frequency | |
| Rating Frequency | 50/60Hz±1Hz |
| Line Mode | Synchronize with the utility |
| Environment | |
| Temperature | 0˚C~40˚C |
| Humidity | 0%~90%RH (Non-condensing) |
| Noise Level | Less than 45dB |
| Indicators | |
| AC Mode | Greenlighting |
| Battery Mode | Yellow flashing |
| Fault | Red lighting |
| Physical | |
| Dimensions (WxDxH) (mm) | 390 x 125 x 225 |
| Net Weight (kg) | 13.4±0.3 |
| Transfer Time | Typical 2~6ms (Max 10ms) |
| Communication Interface | USB/RJ11 (Optional) |
| Battery & Runtime | |
| Rating Voltage | 12V/9AH x 2 |
| Recharge Time | 6-8 hrs recover to 90% capacity |
| Change Current | About 1A at Normal mode |
| Short Circuit Protection | |
| Line Mode | Fuse & firmware protection |
| Battery Mode | Firmware protection |
| Overload Protection | |
| Line Mode | Load<110%±5% go to fault mode after 5 mins |
| Load<120%±5% go to fault mode immediately | |
| Battery Mode | Load<110%±5% shut down after 5 secs |
| Load<120%±5% shut down immediately | |
| Protection | |
| Full Protection | Overload, discharge & overcharge protection |
| Alarm | |
| Battery Mode | Sounding every 10 secs |
| Low Battery | Sounding every sec |
| Overload | Sounding every 0.5 sec |
| Fault | Continuously sounding |
| Management | |
| Compatible with OS | Supports Windows® 2000/2003/XP/Vista/2008/7/8.1/10 |
