

Inverter 300 VA
KSh8,500.00 Original price was: KSh8,500.00.KSh8,000.00Current price is: KSh8,000.00. + VAT
- Voltage: 100v-270v x 220V
- Frequency: 50HZ x 50HZ
- W x H: 17 x 21 cm
Inverter 300 VA Mall+254
Sollatek Inverter 300 VA deliver fully isolated ″clean″ sinusoidal output voltage of 115VAC at 400Hz/60Hz or 230VAC at 50Hz. They typically operate from 24V, 48V, 110V or 125Vdc sources. Efficiency is a minimum of 80% at full load, depending on input/output configuration. The input and output are filtered for low noise. The input meets EN55022 Class A conducted and radiated requirements. An output-fail alarm (Form C) and remote shutdown or enable are available as options.
Inverter 300 VA comply with C22.2 No. 107.1 – 01, UL 458 and EN/UL60950-1 and equivalent industrial safety standards. Protection features include inrush current limiting, input to output isolation, output current limiting with short-circuit protection and thermal shutdown with self-resetting.
All models in the Sollatek Inverter 300 VA series operate at full specification (no de-rating) over a 0°C to +50°C temperature range. Extended temperature ranges are available on request. Cooling is by conduction to customer heat-sink or chassis and by natural convection.
Sollatek Inverter 300 VA designs and manufactures a wide range of industrial and railway quality sine wave power conversion products. All designs can be customized. We also design and manufacture fully custom units.
Sollatek Inverter 300 VA specifications
|
Brand |
|
Model Number |
|
Battery Included |
|
Back Up Time |
|
Load Options |
|
Type |
|
Solar Power Compatible |
|
Efficiency |
|
Output Voltage |
|
Output Frequency |
|
Input Voltage |
|
Input Frequency |
|
You must be logged in to post a review.
Related products
Luminous 12V 850 VA Solar Hybrid Inverter
- Solar hybrid Inverter with inbuilt 30 amp PWM Charge controller
- Delivers both AC & DC output
- Up to 600W PV Module solar panel compatibility
- Intelligent fuzzy logic technology
- Saves on electricity bill
- Pure Sine wave output for equipment safety
- Overload, deep discharge, short-circuit, Battery low cut off protection
- Offers Battery Selection for best results – Tubular/ Flat / Gel or VLRA
MECER Axpert King 5000VA / 5000W Hybrid Pure
- Zero Transfer Time to protect mission critical loads such as servers and ATM's
- Detachable LCD control module with multiple communications
- Built-In Bluetooth for mobile monitoring (Android App is available)
- Supports USB On-the-Go function
- Reserved communication port for BMS(RS485, Can-Bus or RS232)
- Configurable AC/PV output usage timer and prioritization
- Parallel operation with up to 9 units
- 4000W MPPT Solar Controller
- 48V Battery Voltage
- Rated Power: 5000VA/ 5000W
- Input Voltage: 230V AC
- AC Voltage Regulation: 230V AC +/- 5%
- Surge Power: 10000VA for 5 seconds
- Overcharge Protection: 66V DC
- Solar Charger and AC Charger Maximum PV Array Open Circuit Voltage: 145V DC Maximum Charge Current: 140a
- Dimensions(D x W x H): 140 x 300 x 512 (mm)
- Net Weight: 12.2kg
Mecer InfiniSolar 10 kW Hybrid 3 Phase Inverter
- Model InfiniSolar 3P 10 KW
- Max. DC input Voltage: 900 V
- Start-up Voltage 320 V DC
- MPP Voltage Range: 400 V ~ 800 V
- MPP Trackers – 2
- Grid Output Voltage: 230 V AC (P-N) / 400 V AC (P-P)
- Output Voltage Range: 184 – 265 VAC * per phase
- Output Current: 14.5 Amps per phase
- Power Factor: > 0.99
- Maximum Conversion Efficiency ( DC/AC ): 96%
- Pure Sinewave Inverter
- Max. AC Input Current: 40 Amp
- Battery Charging – 48 V
- 10 A to 200 Amp charging – (Adjustable)
- Dimensions – D x W x H (mm): 167.5 x 500 x 622
- Net weight – 45 kg
- Interfaces —
- Communication Port: RS-232/USB and CAN Interface
- Intelligent Slot: Optional SNMP, Modbus and AS-400 cards available
Mecer InfiniSolar 3KW On-grid Inverter with Energy Storage
- Pure sine wave output
- Self-consumption and Feed-in to the grid
- Programmable supply priority for PV, Battery or Grid
- User-adjustable battery charging current suits different types of batteries
- Programmable multiple operation modes: Grid-tie, off-grid and grid-tie with backup
- Built-in timer for various mode of on/off operation
- Multiple communication for USB, RS-232, Modbus and SNMP
- Monitoring software for real-time status display and control
- Parallel operation up to 6 units for 5KW and 10KW
Mecer LOBO 1.2KVA Battery Bank
Mecer Lobo 2.4 KVA with AVR with solar charger with battery bank
- Cells Per Unit Voltage Per Unit Normal Operating Temperature Range Capacity Weight Max.
- Discharge Current Internal Resistance Operating Temperature Range 6 12 o 100Ah @ 10hr-rate to 1.80V per cell @25 C Approx. 30.0 Kg (Tolerance±1.5%) 100(5 sec) Approx. 4 mΩ
- Discharge: -20C ~ 60C and Charge: 0 C~50 C
- Float charging Voltage Recommended Maximum Charging Current Limit Equalization and Cycle Service Self Discharge Terminal Container Material Terminal F10 Dimensions o 13.6 to 13.8 VDC/unit Average at 25 C 60 A o 14.6 to 14.8 VDC/unit Average at 25 C Unit: mm RA12-200 (12V 100Ah)
- Constant Current Discharge Characteristics: A (25 C) o Constant Power Disch
Mecer SOL-I-AX-5NB – Inverters
Vision 6FM100P-X 12v 100AH Sealed Deep Cycle Inverter
- Advanced pure lead technology.
- Longer float & cycle life.
- Stronger discharge performance.
- Maintenance-free operation.
- Special design to avoid thermal runaway.
- Low self discharge.
- Excellent consistency and reliability.
- Can be mounted in any orientation.
- Case and cover available in both standard and flame resistant ABS.
Reviews
There are no reviews yet.