- VGA Cables
- USB Cables
- Computer Accessories
- Logitech Accessories
- Laptop Bags
- Vention
- Anker Accessories
FP200 Gold Prysmian 1.5mm² Fire Resistant Alarm Cable
KSh20,000.00 Original price was: KSh20,000.00.KSh18,000.00Current price is: KSh18,000.00. + VAT
Smoke Detector
KSh4,000.00 Original price was: KSh4,000.00.KSh3,800.00Current price is: KSh3,800.00. + VAT
Fire Alarm Panels
KSh25,000.00 Original price was: KSh25,000.00.KSh24,000.00Current price is: KSh24,000.00. + VAT
‘Normal’, ‘Defect’ and per circuit ‘Fire’ indication on front panel
‘Internal Bell Cut-Off’ and ‘External Bell Cut-Off’ (BCO)
Alarm reset available from a front panel key-switch
Trial Evacuation key-switch
Fire & Defect C/O relays with Fire relay Isolate switch
Automatic Alarm Verification Facility (AVF) provides substantial
protection against transient false alarm activation
Supervised bell circuit with 10 kΩ EOL resistor
Maximum of two 20 Watt 100 Vrms line amplifiers with voice
evacuation message
‘Battery Absent’ detection circuitry
Earth leakage supervision
Integrated Alarm and Defect piezo for audible warning
On-board System ‘Defect’ LED indicates source of fault
Door Interlock
Brigade ‘Isolate’ and ‘Test’ switches
Electrically isolated interface to an alarm transmitter (SGD)
DBA mode ‘Non Latching, Bell Only’ configuration available (on Circuit 4)
Automatic daily load test with automatic ‘Battery Absent’ detection circuitry
14
People watching this product now!
Categories: Fire Alarms & Accessories, Security
Tags: fire alarm control panel, fire alarm control panel installation, fire alarm control panel price, fire alarm control panel wiring diagram, Fire Alarm Control Panels, fire alarm panel location, Fire Alarm Panels, fire alarm system components, fire alarm system design, fire alarm system installation, fire alarm system working principle, fire alarm systems basics, how fire alarm system works
Description
Fire Alarm Panels Mall+254
Fire Alarm Panels is the central element of any fire alarm system. All devices (detectors, call points, sounders, etc.) are connected to the fire panel, which typically provides power to them and information is relayed back and forth to determine whether there is a fire and if so activate an appropriate warning.
Fire Alarm Control Panels is a four-zone Fire Alarm Control Panel designed for low-cost fire alarm systems. Alarm Control Panels supports Smoke Detectors, indicating Manual Call-Points (MCP) and indicating heat detectors, and has the facility to internally mount one or two 20 Watt evacuation amplifiers.
Fire Alarm Control Panels provides an option for brigade connection and complies with the requirements of NZS 4512:2010, and the New Zealand Building Code.
Fire Alarm Control Panels provides an option for brigade connection and complies with the requirements of NZS 4512:2010, and the New Zealand Building Code.
Fire Alarm Control Panels specification
- Normal’, ‘Defect’ and per circuit ‘Fire’ indication on front panel
- Internal Bell Cut-Off’ and ‘External Bell Cut-Off’ (BCO)
- Alarm reset available from a front panel key-switch
- Trial Evacuation key-switch
- Fire & Defect C/O relays with Fire relay Isolate switch
- Automatic Alarm Verification Facility (AVF) provides substantial
- protection against transient false alarm activation
- Supervised bell circuit with 10 kΩ EOL resistor
- Maximum of two 20 Watt 100 Vrms line amplifiers with voice
- evacuation message
- ‘Battery Absent’ detection circuitry
- Earth leakage supervision
- Integrated Alarm and Defect piezo for audible warning
- On-board System ‘Defect’ LED indicates source of fault
- Door Interlock
- Brigade ‘Isolate’ and ‘Test’ switches
- Electrically isolated interface to an a
Reviews (0)
Be the first to review “Fire Alarm Panels”
You must be logged in to post a review.
Shipping & Delivery
Related products
Electric Strike Lock short chassis
Rated 0 out of 5
FR1300 Fingerprint Reader Exit Reader For F18, F2 And F22 Access Control System RS485
Rated 0 out of 5
FR1300 Fingerprint Reader Exit Reader For F18, F2 And F22 Access Control System RS485 is a fingerprint reader with RS485 communication interface works with biometric access controllers and fingerprint standalone access control, including inBIO series controllers, F8 and so on. It offers the function
RL-3915 Melody rings doorbell
Rated 0 out of 5
Zkteco F21 Fingerprint time attendance and access control terminal
Rated 0 out of 5
- Display 2.4-inch TFT LCD Color Screen Fingerprint Capacity 3000 Card Capacity 5000(Optional) ID or mifare card Transaction Capacity 100,000 Sensor SilkID Sensor Algorithm Version ZKFinger VX10.0 Communication RS232/485, TCP/IP, USB-host Access Control Interface 3rd Party Electric Lock, Door Sensor, Exit Button, Alarm, Doorbell Wiegand Signal Input, Output,SRB Aux. Input 1ea for linkage function Functions DST,Automatic Status Switch, Anti-passback,Scheduled-Bell,Printer(Optional) Power Supply 12V DC,3A Operating Temperature 0 °C- 45 °C Operating Humidity 20%-80% SDK and software Standalone SDK,ZKAccess3.5 software
ZKTeco Inbio 260 Two Door Controller
Rated 0 out of 5
ZKteco K40 Biometric Time Attendance Terminal
Rated 0 out of 5
- Fingerprint Capacity 1000 (2000 without SSR )
- ID Card Capacity 1000 (Optional)
- Record Capacity 80,000
- Display 2.8-inch TFT Screen
- Communication TCP/IP, USB Host
- Standard Functions WDMS,Web Server, SMS, Automatic Status Switch,Self-Service Query, Work Code, T9
- input, 9 Digits User ID, DST, Schedule Bell
- Optional Functions ID/Mifare
Zkteco ZK F22 Biometric Fingerprint Access Control
Rated 0 out of 5
ZKteco ZK MA300 Stainless Fingerprint Reader Outdoor
Rated 0 out of 5
ZKteco ZK MA300 Stainless Fingerprint Reader Outdoor, one of the innovative biometric fingerprint readers for access control applications. Offering unparalleled performances by adopting an advanced ZK fingerprint algorithm for reliability, precision and excellent matching speed. It is metallic casing and IP65 rated

Reviews
There are no reviews yet.