Buy Giganet Cat 6A 10G FTP Indoor cable 305M
Original price was: KSh23,000.00.KSh20,000.00Current price is: KSh20,000.00. + VAT
- Ideal for shielded high-speed FTP 10 Gigabit Cat6A networks; Backwards compatible to Cat5E & Cat6 network systems
- Constructed of 4-pairs of 23AWG shielded Pairs-in-Metal-Foil (PIMF) twisted pair copper wires with an overall foil shield, and low flame retardant PVC
- Flexible high-density polyethylene divider isolates pairs for minimal cross-talk
- 1000 feet; Flexible jacket with markers every 2 ft. for length of cable
- Individually boxed on a wooden reel
- Nylon rip cord for slitting of PVC jacket
- Designed for indoor use
Buy Giganet Cat 6A 10G FTP Indoor cable 305M Mtech
Buy Giganet Cat 6A 10G FTP Indoor cable 305M are manufactured and tested to the TIA/EIA 568‐B.2‐1, EN50173‐1 and ISO/ IEC11801 Category 6 specifications. Giganet Cat 6 FTP Indoor cable consists of 8 colour coded 23AWG polyethylene insulated conductors.
Giganet Cat 6 FTP Indoor cable are twisted together to form 4 pairs with varying lay lengths. These pairs are then formed around a central ‘X’ shaped polyethylene filler.
Buy Giganet Cat 6A 10G FTP Indoor cable 305M filler assists in maintaining and enhancing the cables performance. A jacket of UV and moisture resistant polyethelene is applied making this cable ideal for outdoor installation.
Giganet Cat 6A 10G FTP Indoor cable printing detail along the outer sheath includes the cable part code, specification detail and our new 305 to 0 metre marked system.
As the Giganet Cat 6A FTP Indoor cable is dispensed from the box the sequential marking counts down from 305 to 0 metres, as well as reducing waste and accounting easily for cables installed, this innovative print legend finally removes the guesswork from assessing the amount of cable remaining in partly used boxes.
Giganet Cat 6A 10G FTP Indoor cable specifications
| AWG | 23 |
| AWG Stranding | 1 Cond./0.58 mm ± .005 mm |
| Conductor Material | Solid Bare Copper |
| # of Conductors | 8 |
| Conductor Resistance | 82.0 Ohm/km at 20°C Max |
| Conductor Spark Test | 1750 VAC |
| Dielectric Strength | 1500 VAC.2S |
| Conductor Center Degree | ≥ 93% |
| Conductor Drain Wire | 0.16 mm ± 0.002 mm/7C TC |
| Insulation Material | High-Density Polyethylene |
| Insulation Thickness | 0.26 mm |
| Insulation Overall Diameter | 1.15 mm ± 0.05 mm |
| Tensile Strength: 3000 psi | 3000 psi |
| Elongation (Unaged) 400% | 400% |
| Divider | HDPE (4.7 mm) |
| PIMF S
hield Material |
10 mm ± 0.03 mm (Pairs in Metal Foil) |
| Outer Jacket Material | Low-Smoke Flame Retardent PVC |
| Outer Jacket Thickness | 0.5 mm ± 0.05 mm |
| Outer Jacket Nominal Diameter | 6.5 mm ± 0.2 mm |
| Tensile Strength | 2100 psi |
| Elongation (Unaged) | 200% |
| Ripcord | Nylon Rope |
| Compliance | ETL, RoHS |
| Electrical Characteristics | |
| Nominal. Mutual Capacitance | 15.5pF/ft |
| Maximum Capacitance (Unbalanced) | 330 |
| Nominal Velocity of Propagation (VP%) | 72 |
| Maximum Delay (ns/100m) | 536@100MHz |
| Maximum Delay Skew (ns/100m) | 45 |
| Maximum Operating Voltage (UL) | 300V RMS |
| Maximum Cond. DC Resistance | DCR@20°C (Ohm/100m) 8.2 |
| Maximum DCR Unbalanced | DCR@20°C (%) 5 |
| Storage Temperature | -20°C To 75°C |
| Installation Temperature | 0°C To 60°C |
| Operating Temperature | -20°C To 60°C |
| Max. Pulling Tension | 30 lbs. |
| Min. Bend Radius/Minor Axis | 1.5 in |
| Min. Bend/Installation | 2.5 in |
| Bulk Cable Weight | 34 lbs/1000 ft.
|
You must be logged in to post a review.
Related products
100 Pair Telephone Cable
4 core Flat telephone Data Cable
48 port Siemon CAT 6A 10G patch panel
- Connector transmission performance meets or exceeds TIA-568-B.2-10 performance specifications
- Connector contact design provides enhanced plug to jack connection integrity and protects against damage caused by insertion of 4 or 6 position plugs
- Angled design eliminates the need for cable management panels providing additional rack space
- Rear termination is made quick and easy using a 110 type connector compatible with an industry standard single position 110 or Krone termination tool
- Connectors are rated for at least 750 plug insertions providing for the highest level of system reliability
- Maximum strength and durability construction
Reviews
There are no reviews yet.