B593 Huawei 4G LTE Simcard Router Mall+254

B593 Huawei 4G LTE Simcard Router from the leading Huawei simcard dealer in Nairobi Kenya, buy B593 Huawei 4G LTE Simcard Router  and have it delivered at your door step.

Procedure

1. You should start by inserting the SIM card and then plug the power adapter to the B593 4G router. The SIM card must be inserted on the right side when looking at the front of the router. You can see the SIM card slot in the LTE CPE B593. The power plug must be inserted behind the router.

2. Now you need to connect the router to your computer via the wireless network (WiFi). You will find the router’s name and network code on the sticker behind the router.

WLAN – Name (SSID) is the router’s name and WLAN – Key (WPA/WPA2) is the router’s wireless network password. When you first connect the router via WiFi, it would be necessary to enter the WLAN key and get connected.

If you experience problems connecting to the router with the information on the back of the router, this information may be changed. Press reset on the side of the router with a ball pen for about 20 seconds and try again.

3. Once connected, open your Internet browser (e.g. Internet Explorer, Chrome or Safari) and in the address bar type the router’s address http://192.168.1.1 (or Homerouter.cpe). It’s the device website on the label.

The default language is English, but you can choose your preferred language. The username is admin and the password is admin (lowercase). You can also find both the router’s address and password on the sticker behind the router.

4. The router will ask you to change the password when you login. You can ignore it. Your router is already secured with the unique network code that you entered earlier in order to connect to the router.

5. Now select Setup Wizard on the left menu.

You must validate your PIN to the SIM card. You will find PIN 1 on the frame (where you took the SIM card out of the scrape area). Then click Validate. Tick Enable next to Save my PIN and press Next.

Please note that the router stores the PIN code for the SIM card. Put one new SIM card in the router at a time; enter the PIN code for the new SIM card in the same way.

But if you use the unlocked B593 Router, it’s unnecessary to do this. 4GLTEMALL.com is selling the unlocked B593 Router.

6. You do not need to change anything in the next section called Internet.

The network mode is by default Auto and the Connection Mode is Always On. Please note that ‘LTE Only‘ means ‘4G Only‘ and ‘WCDMA only‘ means ‘3G only‘ in the Network mode. You can try to isolate the signal to one of them if you wish. If you set it as Auto (recommended), the router will always try to use 4G as a primary connection. Press Next.

7. You do not need to change anything in the next section called WLAN.

If you want to call your router something other than WLAN1-xxxx (its SSID), you need to change. We do not recommend that you do and then you will always be able to find the router’s name on the back of the router if you do not change it. Press Next.

8. We do not recommend that you change the following in the next point WLAN Security. The Network code field is WPA with pre-shared key. This code is already unique and you should only use it once when you connect to the router for the first time on your computer or your mobile. You will also be able to find the network code on the back of the router if you ever need it again later.

If you want to change it anyway, you must enter a code of minimum 8 characters and press Next. Otherwise, press Next without changing the information below.

9. Now press Submit and your router will reboot and you will be on the internet.

10. Repeat point 2 for all devices to connect with the Internet.

Color Codes

Color Coding Mode on the front of the router
The purple color means that the router lacks the PIN. The blue color means that you are on 4G. The green color means that you are on 3G.

Firmware upgrade – Quick Guide for upgrade

1. Download the latest HUAWEI B593u-12 firmware upgrade.

2. Save the file to your desktop and unzip the file when you are finished.

3. Open your browser and log in to your router via 192.168.1.1 (username: admin; password: admin – lower case).

4. Select System > Upgrade > select tar. > press Upgrade, then wait for few minutes, the system will auto upgrade the firmware of the HUAWEI B593u-12.

These steps are also usable for HUAWEI B593s-22 and HUAWEI B593 other models. The firmware may vary varies.