APC 1600VA 230V AVR IEC Sockets Back-UPS (BX1600MI)
Product Details and Specification
- Model: APC BX1600MI
- Type: Line-Interactive UPS
- Power Capacity: 1600 VA / 900 Watts
- Input Voltage: 230V (nominal)
- Input Voltage Range: 150V – 280V (without battery usage)
- Input Frequency: 50/60 Hz (auto-sensing)
- Output Voltage: 230V (nominal)
- Output Frequency: 50/60 Hz ± 1 Hz (auto-sensing)
- Waveform Type: Stepped Approximation to Sine Wave
Battery Specifications
- Battery Type: Sealed Lead Acid (SLA), maintenance-free
- Battery Voltage: 24V DC
- Battery Capacity: 9Ah per battery
- Typical Runtime:
- At Full Load (900W): Approximately 5-7 minutes
- At Half Load (450W): Approximately 15-20 minutes
- Recharge Time: 6-8 hours to 90% capacity
- Hot-Swappable Batteries: No
Physical Specifications
- Form Factor: Tower
- Dimensions:
- Height: 190 mm (7.48 inches)
- Width: 140 mm (5.51 inches)
- Depth: 390 mm (15.35 inches)
- Weight: Approximately 12.5 kg (27.56 lbs)
Output Connections
- Output Connections:
- 4 x IEC 320 C13 outlets (with battery backup and surge protection)
Management & Communications
- Status Indicators: LED status indicators for power, battery, and load status
- Communication Ports:
- USB (for monitoring via APC PowerChute software)
- Network Management: No integrated network management capabilities
- Emergency Power Off (EPO): Not available
Protection Features
- Surge Protection: Yes, provides protection from surges and spikes (156 Joules)
- Overload Protection: Yes, with automatic bypass
- Short Circuit Protection: Yes
- Automatic Voltage Regulation (AVR): Boost and Trim AVR corrects high and low voltage conditions without using the battery
- Cold Start Capability: Yes, provides temporary battery power when the utility power is out
Environmental Specifications
- Operating Temperature: 0°C to 40°C (32°F to 104°F)
- Storage Temperature: -15°C to 45°C (5°F to 113°F)
- Operating Humidity: 0% to 95% non-condensing
- Operating Elevation: 0 to 3000 meters (0 to 10,000 feet)
Certifications and Compliance
- Safety Approvals: IEC/EN 62040-1
- EMC Compliance: IEC/EN 62040-2
- Environmental Compliance: RoHS
Additional Features
- Energy Efficiency: Designed for high efficiency with reduced power consumption
- Warranty: Typically 2 years (varies by region)
| Specification | |
| Output power capacity | 900 Watts / 1.6kVA |
| Output Connections | (6) IEC 60320 C13 (Battery Backup) |
| Nominal Output Voltage | 230V |
| Nominal Input Voltage | 230V |
| Input Connections | IEC 60320 C14 |
| Cord Length | 1.2 Metres |
| Key Features | |
| Automatic Voltage Regulation (AVR) | Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. |
| Dataline surge protection | Provides protection of connected equipment from power surges on the data lines. |
| LED Indicators | Provide easy-to-read status of the unit and utility power conditions. |
| PowerChute Personal Edition OS Compatibility | This software supports numerous operating systems and processors. |
| USB connection | Use your PC to access additional power protection and management features for your UPS via a USB Port. |
| Availability | |
| Automatic self-test | Periodic battery self-test ensures early detection of a battery that needs to be replaced. |
| Battery failure notification | Provides early-warning fault analysis on batteries enabling timely preventive maintenance |
| Intelligent battery management | Maximizes battery performance, life, and reliability through intelligent, precision charging. |
| Manageability | |
| LED status display | Quickly understand unit and power status with visual indicators. |
| Audible alarms | Provides notification of changing utility power and UPS power conditions |
| Protection | |
| Battery and surge protected outlets | Back up and protect your hardware and data during power outages, surges and spikes. |
| Surge only outlets | Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage. |
| Safety | |
| Safety-agency approved | Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. |
