APC Back-UPS 1200VA, 230V, AVR, IEC Sockets Mall+254
The APC Back-UPS 1200VA, 230V, AVR, IEC Sockets (BX1200MI) is a UPS system with surge protection for electronic devices and computers. The Automatic Voltage Regulation (AVR) automatically increases the low voltage gradually and reduces the high voltage to levels suitable for the equipment. The overvoltage protection protects connected devices from overvoltage on data lines. You can use your PC to access additional management functions of the UPS via a USB connection.
APC 1200VA Backup UPS, 230V, AVR, IEC Sockets specification
- Model: APC Back-UPS 1200VA
- Type: Line-Interactive UPS
- Power Capacity: 1200 VA / 720 Watts
- Input Voltage: 230V (nominal)
- Input Voltage Range: 160V – 290V (without battery usage)
- Input Frequency: 50/60 Hz (auto-sensing)
- Output Voltage: 230V (nominal)
- Output Frequency: 50/60 Hz ± 1 Hz (auto-sensing)
- Waveform Type: Stepped Approximation to Sine Wave
Battery Specifications
- Battery Type: Sealed Lead Acid (SLA), maintenance-free
- Battery Voltage: 12V DC
- Battery Capacity: 7Ah per battery
- Typical Runtime:
- At Full Load (720W): Approximately 5-8 minutes
- At Half Load (360W): Approximately 15-20 minutes
- Recharge Time: 4-6 hours to 90% capacity
- Hot-Swappable Batteries: No (batteries need to be replaced by an authorized technician)
Physical Specifications
- Form Factor: Tower
- Dimensions:
- Height: 232 mm (9.13 inches)
- Width: 150 mm (5.91 inches)
- Depth: 380 mm (14.96 inches)
- Weight: Approximately 10 kg (22 lbs)
Output Connections
- Output Connections:
- 4 x IEC 320 C13 outlets
- 1 x IEC 320 C14 inlet (Input)
Management & Communications
- Status Indicators: LED indicators for power, battery, and load status
- Communication Ports:
- USB (for monitoring via software)
- Network Management: Optional network management card (sold separately)
- Emergency Power Off (EPO): Not available
Protection Features
- Surge Protection: Yes, provides protection from surges and spikes
- Overload Protection: Yes, with automatic bypass
- Short Circuit Protection: Yes
- Automatic Voltage Regulation (AVR): Boost and Trim AVR corrects high and low voltage conditions without using the battery
- Cold Start Capability: Yes, provides temporary battery power when the utility power is out
Environmental Specifications
- Operating Temperature: 0°C to 40°C (32°F to 104°F)
- Storage Temperature: -15°C to 45°C (5°F to 113°F)
- Operating Humidity: 0% to 95% non-condensing
- Operating Elevation: 0 to 3000 meters (0 to 10,000 feet)
Certifications and Compliance
- Safety Approvals: IEC/EN 62040-1
- EMC Compliance: IEC/EN 62040-2
- Environmental Compliance: RoHS
Additional Features
- Energy Efficiency: Designed for high efficiency and reduced power consumption
- Warranty: Typically 2 years (varies by region)
Type | UPS | ||
colour | black | ||
EAN | 0731304410812 | ||
Manufacturer no. | BX1200MI | ||
Bridging time | Full load | 1 min | |
Half load | 5 min | ||
rated capacity | 650 watts (1,200 VA) | ||
Input voltage | from 230 V to 230 V. | ||
Output voltage | Network operation | 230 V | |
Battery operated | 230 V | ||
connections | 2x RJ-45, 1x USB | ||
Output sockets | 6 pieces, connected to the battery | ||
Type | C13 | ||
Warning message | optically | LED status display for mains operation: battery operation | |
acoustically | Alarm when battery on, specific low battery alarm | ||
Surroundings | operating temperature | from 0 ° C to 40 ° C | |
Storage temperature | from -15 ° C to 40 ° C | ||
humidity | up to 95% | ||
safety | Overvoltage protection (OVP) | ||
Further information | Entrance: C14 | ||
Dimensions | Width: 140 mm x height: 190 mm x depth / length: 390 mm | ||
Weight | 7.6 kg |