Fire Fighting Equipment and Accessories

Fire fighting systems and equipment vary depending on the age, size, use and type of building construction. A building may contain some or all of the following features:

fire extinguishers

fire hose reels

fire hydrant systems

automatic sprinkler systems.

  1. Fire extinguishers

Fire extinguishers are provided for a ‘first attack’ fire fighting measure, generally undertaken by the occupants of the building before the fire service arrives. It is important that occupants are familiar with which extinguisher type to use on which fire.

Most fires start as a small fire and may be extinguished if the correct type and amount of extinguishing agent is applied whilst the fire is small and controllable.

The principle fire extinguisher types currently available include:

Extinguishing Agent    Principle Use
Waterwood and paper fires – not electrical
Foamflammable liquid fires – not electrical
Carbon dioxideelectrical fires
Dry Chemicalflammable liquids and electrical fires
Wet chemicalfat fires – not electrical
Special Purposevarious (eg metal fires)

Fire extinguisher locations must be clearly identified. Extinguishers are colour coded according to the extinguishing agent.

It is the policy of the Community Safety and Resilience Department that fire extinguishers be logically grouped at exits from the building, so that occupants first go to the exit and then return to fight the fire, knowing that a safe exit lies behind them, away from the fire.

In some instances this will be at odds with the prescriptive requirements of Australian Standard AS2444 Portable fire extinguishers and fire blankets – Selection and location, which simply specifies a distance of travel to a fire extinguisher rather than their location in relation to escape paths.

 Blind compliance with the standard has the potential to place the fire between the occupant and the safe escape path.

Fire hose reels

Fire hose reels are provided for use by occupants as a ‘first attack’ fire fighting measure but may, in some instances, also be used by firefighters.

When stowing a fire hose reel, it is important to first attach the nozzle end to the hose reel valve, then close the hose reel valve, then open the nozzle to relieve any pressure in the wound hose, then close the nozzle. This achieves two principle objectives:

When the hose reel is next used, the operator will be forced to turn on the isolating valve, thus charging the hose reel with pressurised water supply, before being able to drag the hose to the fire. A potential danger exists if the operator reaches the fire and finds no water is available because the hose reel valve is still closed.

Because hose reels are generally located next to an exit, in an emergency it is possible to reach a safe place simply by following the hose.

Fire hydrant systems

Fire hydrant systems are installed in buildings to help firefighters quickly attack the fire. Essentially, a hydrant system is a water reticulation system used to transport water in order to limit the amount of hose that firefighters have to lay, thus speeding up the fire fighting process.

Fire hydrants are for the sole use of trained firefighters (which includes factory fire fighting teams). Because of the high pressures available serious injury can occur if untrained persons attempt to operate the equipment connected to such installations.

Fire hydrant systems sometimes include ancillary parts essential to their effective operation such as pumps, tanks and fire service booster connections. These systems must be maintained and regularly tested if they are to be effective when needed.

The placement of such equipment needs to closely interface with fire service operational procedure; simply complying with deemed to satisfy code provisions is a potential recipe for disaster. For any advice regarding these systems, old or new, please ask the intended users; contact the Community Safety and Resilience Department.

Automatic Sprinkler Systems

Time is essential in the control of fire. Automatic sprinkler systems are one of the most reliable methods available for controlling fires. Today’s automatic fire sprinkler systems offer state of the art protection of life and property from the effects of fire. Sprinkler heads are now available which are twenty times more sensitive to fire than they were ten years ago.

A sprinkler head is really an automatic (open once only) tap. The sprinkler head is connected to a pressurised water system. When the fire heats up the sprinkler head, it opens at a pre-set temperature, thus allowing pressurised water to be sprayed both down onto the fire and also up to cool the hot smoky layer and the building structure above the fire. This spray also wets combustible material in the vicinity of the fire, making it difficult to ignite, thereby slowing down or preventing fire spread and growth.

When a sprinkler head operates, the water pressure in the system drops, activating an alarm which often automatically calls the fire service via a telephone connection.

Some people say sprinklers cause a lot of water damage. As has been explained, only those sprinkler heads heated by the fire operate; all sprinklers in a building do not operate at once. Usually non-fire water damage only occurs if the occupants carelessly damage the system. Firefighters use much more water than a sprinkler system. The combined damage from a fire and the water used by firefighters dramatically exceeds that likely from a properly installed sprinkler system.

Because, historically, complete extinguishment of fires has not been achieved, it is traditional to consider that sprinklers only control fire growth until intervention occurs by the fire service. Today, some sprinkler systems are designed for early suppression and are considered to have failed if they do not extinguish the fire.

Sprinkler systems are usually installed in high or large buildings and high fire hazard occupancies. Statistics show that in a majority of cases where sprinklers are installed the fire has been controlled by one sprinkler head alone.

For further discussion or advice on these issues, please contact the Community Safety and Resilience Department.

Advantages of Fire Fighting Equipments

  • Certainty of avoiding the outbreak and spread of fire
  • Retaining access to protected areas at any time
  • Proactive and permanent fire protection to secure business processes and valuable goods
  • Protecting multiple hazards with just one system
  • Fire protection without any interruption – no refilling or replacement needed
  • Absolute safety for human beings through using breathable air – no nitrogen injection
  • Environmentally friendly – no chemicals used
  • Easy to install and maintain
  • Very small footprint and little building space needed
  • Scalable to any size of protected areas and number of protected compartments
  • No design limitations
  • No damages by fire, released water, foam or other extinguishing agents
  • No excessive piping, no nozzles, no pressurized cylinders, no leaking
  • No false discharges , no discharge failures, no loss of work time , no interruptions of working processes, no consequential costs
  • No disruption of working processes, no consequential costs, no closing of unusable areas due to fire damages, clean-up or repair